Peaq PDR100 Mode D'emploi page 36

ENGLISH
STORING DAB STATIONS
You can store up to 10 pre-set DAB/DAB+
stations.
1. Select the desired station.
2. Press and hold Preset and turn Scroll to
pre-set a number from 1 - 10.
3. Press Scroll to confirm the selection.
4. The pre-set number of the stored station
is displayed.
5. Repeat steps 1 to 4 to store more DAB/
DAB+ stations.
SELECTING PRE-SET DAB STATIONS
1. Press Mode to select the DAB/DAB+
station.
2. Press Preset to access the Preset menu.
3. Use Scroll to select a pre-set number
and confirm your selection by pressing
the Scroll button.
36
PDR100_IM_03.indb 36
USING THE DAB/DAB+ MENUS
1. Press MENU in DAB/DAB+ mode to open
the DAB+ Menu.
2. Turn Scroll to browse the menu options.
[Full scan]
Searches for all available DAB/DAB+
stations.
[DRC]
(Dynamic Range Control) Removes
or adds the degree of adaptation
required for the differences in
dynamic range between stations.
[Prune]
Removes all invalid stations from the
station list.
DRC (DYNAMIC RANGE CONTROL)
Dynamic Range Control (DRC) removes or
adds the degree of adaptation required for the
differences in dynamic range between stations.
1. Press Menu and turn Scroll until DRC is
displayed.
2. Press Scroll to access the DRC menu.
3. Turn Scroll to select the DRC setting.
DRC high: DRC turned on; default
setting recommended for noisy
environments.
DRC low: DRC is set to half the
normal level.
DRC off: DRC is turned off.
9/27/12 6:07 PM