In the Event of an Alarm
If the CO alarm detects a critical concentration of carbon
monoxide, the alarm is triggered and the Alarm LED
flashes.
Switching the Alarm Off
1
Press the Test/Silence
button to switch the alarm
off� The CO alarm now
works normally again,
the Power LED flashes
every 50 seconds and the
Alarm LED goes out�
Warning! Carbon
monoxide is a
highly flammable,
invisible, odourless gas� Take every alarm
seriously� Follow the instructions provided in
Section In the Event of an Alarm on
Page 26�
The alarm stops automatically when the
concentration of carbon monoxide drops below
a safe threshold value�
POWER
35
FAULT
ALARM
POWER
FAULT
ALARM