Assembling The Co Alarm - Olymp KM 210 Mode D'emploi

Assembling the CO Alarm

When assembling the device, pay attention to maintaining
at least 100 cm distance to doors, windows or ventilation
ducts�
Warning! Risk of serious injuries through
damaging cables or pipes! During installation,
pay attention to the possibility of cables and
pipes running in the walls� We are not deemed
liable for installation errors� If in doubt, contact a
specialist!
1
Ensure that there are no electric cables, gas or water
pipes near the installation location�
1
Drill two holes, about 146 mm apart, at the intended
installation location�
2
Insert the dowels and screws supplied in the drill holes�
3
Fit the CO alarm on the screws�
146 mm
34