Safety Instructions - Genano 5250 Manuel D'utilisation

Safety instructions

1. Only use the unit indoors.
2. Do not place or store the unit where it can get wet. Do not keep the unit
in the rain or pour water on it. Do not use a wet unit.
3. Never put the unit in direct, hot sunlight or store at a temperature above
140°F (60°C).
4. Do not place or store the unit in a place where it can fall over.
5. Do not use the unit in spaces without normal ventilation. Make sure you
have sufficient ventilation.
6. Do not use the unit if it is damaged in any way.
7. Do not use the unit if it has a damaged cord or plug. Return the unit to an
authorized Genano service location for examination and repair.
8. To prevent possible damage to the cord, do not wrap the cord around
the unit and keep the cord away from heated surfaces.
9. Only plug the unit to a grounded outlet.
10. Always attach the power cable first to the unit, then to the outlet (wall).
Be certain that the plug is inserted firmly into the unit. To disconnect, turn
off the device, then remove the plug from the outlet.
11. Unplug the unit before moving or transporting it to another location.
12. Do not cover the air intakes of the unit. Do not place anything directly on
top of the unit.
13. Never drop or insert any object into any opening.
14. Lock the bottom basin when the unit is operated near children or pets.
15. The unit is only allowed to be serviced by an authorized repair service.
16. Do not take the gas absorption plate out of the unit.
17. WARNING! Due to its mode of operation the electronic unit may occa-
sionally emit sparks. Never use the unit in a place where flammable gases
or liquids or large amounts of dust may combine with air to form an
explosive mixture.
Always follow the operational instructions when using this Genano unit. Do
not use expansions or supplies not recommended or used by Genano Ltd.
Manufacturer: Genano Ltd
42