Genano 5250 Manuel D'utilisation page 37

WEEKLY PROGRAM
If a weekly program is turned on, the unit will automatically change air flow at
predefined times. This is indicated by the word "AUTO" in the top part of the touch
screen (see image B, page 36).
If you adjust the air flow manually, using the slider, the word "MANUAL" will appear
in the top part of the touch screen. The unit will continue at your chosen fan
speed until the next change in the weekly program takes place. At this moment,
the "AUTO" program is taken into use again.
If you wish to change the weekly program settings or disable it, please contact the
maintenance of your property.
ERROR/SERVICE
Genano 5250 has an internal monitoring system. A message is shown on the
touch screen when:
• low level of washing liquid is detected,
• unit has ran out of washing liquid,
• front door is open,
• or there is a malfunction which requires service.
Please act according to the instructions given on the screen.
OTHER ACTIONS
Using the Genano 5250 is easy for you. You are only meant to use the unit from
the touch screen. You never need to open the front door of the unit in normal use.
An authorized Genano service will take care of the cleaning of the bottom basin,
as well as adding the washing liquid in the unit.
37