Stanley STHT0-77365 Manuel D'utilisation page 2

GB
User Manual
LASER LASER
1
Laser
Emitter
Infrared
Distance
Lense
Trigger
Battery
Cover 2cm@16cm
3cm@24cm
Distance to spot size = 8:1
Measurement
Indicator
Battery
SCAN
Level
Scanned
Temperature
REF
Reference
Temperature
STANLEY IR Thermometer
®
The STANLEY IR Thermometer is a non-contact
temperature measuring thermometer. It utilizes
infrared technology and a color changing display
for quick, intuitive feedback. The STANLEY
IR Thermometer can be used to measure the
surface temperature of an object or find thermal
leaks along walls, molding, ductwork and more.
USER SAFETY
WARNING: Read and understand all
instructions. Failure to follow all instructions
listed below may result in personal injury:
• DANGER: Laser Radiation, avoid direct
eye exposure, serious eye injury can result.
• DO NOT Use optical tools such as
a telescope or transit to view the laser beam.
• ALWAYS position the laser so unintentional
2
Distance
Distance
2 cm @ 16 cm
2cm@16cm
3 cm @ 24cm
3cm@24cm
Distance to spot size = 8:1
Distance to spot size = 8:1
SCAN HIGH
NORMAL
LOW
1cm@8cm
REF
Select/Off
Button
Temperture
Difference
HIGH
NORMAL
LOW
°C Units
°F
Threshold
Indicator
eye contact will be avoided.
• DO NOT operate the laser around children or
allow children to operate the laser.
• DO NOT disassemble. Modifying the product
in any way can increase the risk of laser
º C/ º F
radiation.
SET
WARNING: Use of controls or
•
1 cm @ 8 cm
1cm@8cm
adjustments or performance of procedures
OFF
º C/ º F
other than those specified in this manual may
result in hazardous laser radiation exposure.
SET
Display
• DO NOT operate in explosive atmospheres,
°C
°F
such as in the presence of flammable liquids,
gases, or dust.
Units/Set
Button
• ALWAYS use only the batteries specified
OFF
for use with this product. Use of any other
batteries may create a risk of fire.
• ALWAYS store idle product out of reach of
children and other untrained persons. Lasers
may be dangerous in the hands of untrained
users.
• ALWAYS use only accessories that are
recommended by the manufacturer for you
model. Accessories that may be suitable for
one laser may create a risk of injury when
used on another laser.
• DO NOT remove or deface warning labels.
Removing labels increases risk of laser
radiation.
• DO NOT disassemble, service or repair this
product. Repairs performed by unqualified
personnel could result in serious injury.
• DO NOT direct the laser beam toward aircraft
or moving vehicles.
• DO NOT project laser beam onto a reflective
surface.
• DO NOT splash or immerse the unit in water.
• ALWAYS turn off the product when not in
use.
• ALWAYS ensure battery is inserted in the
correct manner, with the correct polarity.