Incoming Voice Tone - Plantronics Walker Ameriphone XL-30 Manuel D'utilisation

Using Your XL-30
(Continued)
CAUTION: Repeated incremental
exposure to amplification levels
greater than18 dB may be
harmful to individuals without
hearing disabilities. Therefore,
do not remove the warning
label attached to the back
of the handset. If it is likely that
a visually impaired person will use
the telephone, securely attach the
provided warning printed in
Braille to the back of the handset
(See, Diagram A).
Diagram A.
NOTE: In standard use, the
amplifier turns off whenever you
hang up the telephone. This is a
useful feature if many people use
the phone. If you want the
amplifier to always remain on,
slide the Volume Reset Override
switch on the bottom of the phone
to ON, as shown in Figure 10.
7
Figure 10 - Volume Reset Override On/Off

Incoming Voice Tone

The XL-30 provides extra
amplification at the sound
frequency you need to boost. To
identify the sound frequency range
that best suits your needs, follow
these steps:
1. When you hear a voice on the
line, press the AMPLIFY button
shown in Figure 8.
2. Adjust the TONE slide control in
Figure 11 to suit your hearing.
*
HOLD
TONE
LO
Figure 11 - Tone Slide Control
- OFF
MANUAL
AUTO
- ON
Volume
Reset
Override
0 #
PROG FLASH REDIAL
AMPLIFY
VOL
HI