Technical Data; Safety Instructions; Device Characteristics - Storch Crossline 360 Mode D'emploi

Technical data

Laser beam
Light sources
Laser safety classes
Max. output
Laser diode
Plumbline beam laser class
Plumbline beam diode
Accuracy
Self-levelling range
Adjusting time
Working range
Sensitivity circular level
Rotation
All information is without guarantee! Subject to technical modifications and errors!

Safety instructions

1. The Line Laser CrossLine 360 is a Class 2 laser 2 (10 mW) pursuant to CFR21.
2. Do not stare at the laser, it will damage your eyes.
3. When moving the device, please turn off the power.
4. Do not use an acute article like finger nail to push the button on the top of the unit.
5. If ever possible, please use batteries of one manufacturer and of the same type.
6. When the instrument does not be used, please take off the batteries to avoid battery electrolyte effusion.
7. Remove batteries from the device in case of power supply operation.
8. Do not open the batteries or throw them onto the fire: dispose of used batteries in a responsible manner.
9. Do not use or keep the line laser in damp conditions.

Device characteristics

1. Separate keys for horizontal and vertical lines. Dimmer key bright / dark.
2. Magnetic self-levelling.
3. Directing spirit-level in the base.
4. If the device angle exceeds the limit value, the laser beam will automatically start to flash and an alarm sounds.
5. The fine adjustment mechanism which can be turned by 360° allows precise alignment of the vertical laser lines.
6. Optional power supply operation
7. When switched off, the magnetic self-levelling mechanism is automatically locked by the integrated locking device
to avoid any damage at the fine electronics during transportation.
4V4H1D
Class 2 < 10 mW
< 1 mW
635 nm
2 < 1 mW
650 nm
± 2 mm / 10 m
± 3°
< 5 seconds
Radius 15 m
60' / 2 mm
360°
27
Fine adjustment mechanism for the variable laser lines
Power supply
Battery operation
Tripod thread
Operating temperature
Weight
Size
4 x 1.5 V (AA) batte-
ries or with optional
power supply opera-
tion
+/- 5 St. at full load
5/8"
-10° C ~ +40° C
1.2 kg (incl. batte-
ries)
Ø 90 mm x 195 mm
Translation of the original instruction