Peaq Dect-Phone PDP 270 Mode D'emploi page 43

Note: To use this feature, it's required that both
phone lines must have the Caller ID function
enabled. If the Room Monitor is enabled on
multiple handsets for the same phone number,
the handset with the lowest handset ID will
respond if a call is made to the room monitor.
If no phone number has been saved, the only
available menu option will be "New". If a phone
number has been saved already, the items
"On/Off" and "Edit" will be shown.
• New: Enter a phone number which you
will call later.
• On/Off: Enable or disable the room
monitor function.
• Edit: Edit the saved phone number.
ECO MODE
Additional Features
Direct Call
Room Monitor
ECO Mode
Private Call
This DECT phone can be operated in low power
mode (ECO mode) with reduce RF power.
Select the mode "Normal" or "Zero Emission"
with the button and confirmed with the
right display button.
PRIVATE CALL
Additional Features
Direct Call
Room Monitor
ECO Mode
Private Call
Hide or show your caller ID for outgoing calls.
You can select:
IM_PDP270_150518_V03_HR.indb 43
• Show Number: your caller ID will be
shown
• Hide Number: your caller ID will not be
shown
Note: It's required that your telephone provider
support the Private call function.
SMS
SMS Message
Write Message
Inbox
Drafts
OutBox
Templates
SMS Settings
You can received and send messages (SMS)
with this mobile phone.
Requirements:
• Caller IDD function must be enable for
this phone line.
• Sending and receiving SMS messages has
been enable by your telephone provider.
For detail information please contact your
telephone provider.
Options described in the below table are
available. Press the right display button to
open the overview and select an option with the
button. Confirm with right display button.
Option Explanation
Send • send SMS
• v i a e n t e r i n g p h o n e
number or select contact
from phonebook
Save SMS • save SMS in draft
Templates • use templates
Delete • delete SMS
Reply • reply to a received SMS
ENGLISH
43
18/5/15 11:36 AM