These are its main features:
•
Two-channel input mixer, with one MIC/LINE input and one LINE only input
•
Class-D stereo integrated amplifier, 2 x 50W RMS @ 4 Ω
•
Direct AUX IN (Channel 2) line input via a front panel mini-jack, ideal to connect iPod
players, mp3 players, multimedia players, etc. The same stereo connection is duplicated on
back panel for Channel 2 (RCA connectors)
•
A Type A USB connector supplies power to charge batteries of iPod
players, multimedia players, etc.
•
Includes a Talkover function assigned to Input 1, with an internal recovery time selector
(see configuration diagram)
•
Microphone sensitivity level can be adjusted with a back panel trimmer
•
Internally switchable phantom power supply (+15V DC) for MIC (Channel 1)
•
Level control for each input channel
•
3-Band tone controls on the back panel, independent for each input channel and adjustable
with a screwdriver
•
Main output level rotary knob also working as a MUTE push button
•
Output volume and mute remote control by means of the supplied infrared remote handset
•
Line-level auxiliary output for a reinforcement subwoofer or another audio equipment
•
Direct MIX IN input to the mixing "bus", allowing to connect external equipment, e.g.
another PKUB or a SAM type mixer
•
General "MUTE" remote control by external contact closure, ideal for connection of fire
detection systems or any other safety device. Internally selectable as "NO / NC" (normally
open / normally closed).
•
Back panel MONO/STEREO mode selector
®
type
®
type players, mp3
5