Fluval A3977 Mode D'emploi page 3

Transformer
1 LAMP SET-UP
Lamp
✓
Power
supply
OPERATING INSTRUCTIONS
1. Once the system is activated, the timer's START screen will appear
2. After a short pause, the timer will then begin to automatically calibrate the buttons (do not touch
the buttons during this process).
3. Once the calibration is complete the HOME screen will appear.
MAIN MENU
1. Once the HOME screen appears, use the ENTER button (middle button) to access the main
menu.
2. Once the MAIN MENU appears, use the UP ARROW and DOWN ARROW buttons to select an
OUTPUT MENU or the TIME MENU; then press the ENTER button.
TIME MENU
Use the up arrow and down arrow buttons to select the time and time format (12H am/pm or 24H);
press the enter button.
OUTPUT MENU
1. Use the up arrow and down arrow buttons to select between SUNRISE, SUNSET or MOON; press the enter
button.
2. SUNRISE/SUNSET:
button. The START mode allows you to select the time of the sunrise or sunset. Within the ACTION mode, there
are 2 options: FADE and SWITCH. The FADE option, for use with dimmable LED lamps only, will allow the LED to
gradually adjust light intensity over the selected time. The SWITCH option, for use with non-dimming LED lamps,
will only turn the light on and/or off at the selected time. Take note that the MOON feature will be disabled (0%)
in the switch mode.
3. MOON:
This setting allows you to regulate light intensity between the dusk and dawn cycle. Use the up and
down arrow buttons to select the power (%) of desired moonlight (i.e. the intensity level the light will reduce to
between dusk and dawn), and press the enter button.
BASIC TROUBLE-SHOOTING
If the timer/lamp fixture (s) does not work, ensure that all plugs and wires are firmly connected ie: connection from
timer to lamp fixture; connection from timer to lamp transformer, and connection from transformer to electrical outlet.
Female connector
Male connector
Female connector
Lamp Lamp
✓
Power Power
supply supply
Use the up and down arrow buttons to select START or ACTION, and press the enter
Male connector
2 LAMP SET-UP
Lamp 1
✗
1
Power supply
LED
Lamp Timer
Lamp 2 Lamp 1
✓
2
Power supply
Lamp 2
✗
2 1