Starting-Up; Pan Detection; Residual Heat Indication; Booster Function - Mobalpa AP6EN3 Notice D'utilisation

Starting-up

• Start up / switch off the hob:
Action
To start
To stop
• Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 seconds the electronics returns to waiting position.

Pan detection

The pan detection ensures perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not suitable to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [
U ]. The symbol [ U ] disappears when the pan is put back on the heating zone. The
cooking continues with the power level set before.
• After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The Booster function [ P ] and the Double Booster [
heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high Booster.
Booster is useful for example to heat up rapidly big quantities of water, like rice, pasta or noodles.
• Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
Control panel
press key [ ]
press key [ ]
Control panel
press display [ 0 ] selected
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
Control panel
Press key [ 0 ] from the zone
Press key [ B² ]
Slide on the "SLIDER"
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ]
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
] adds a booster power to the selected
Display
[ 0 ]
[ P ]
[ 9 ] to [ 0 ]
31