Electrical Power Supply System - Favero Electronics FC Série Mode D'installation Et D'emploi

Alignment of the brackets.
Fig. 2
4.2. Connecting the modules
After attaching the various modules to the brackets, you can now proceed to connecting the electrical
system. Connect the cables coming out of the power supply module (identified with: CENTER 1) to the
cables of the other modules. Any connection sequence between male - female connectors can be used
(Fig. 1).

5. Electrical power supply system

Remember that the electrical power system MUST be implemented by a qualified technician.
5.1. Power socket
Each scoreboard comes with a power cord and plug. We suggest that a power supply socket be positioned
just above the board.
5.2. Power switch device
There MUST be a power switch device (isolating switch) in the electrical system in order to
switch off the scoreboard when it is not being used or while under maintenance.
5.3. Grounding
The scoreboard MUST be connected to a grounding system via the power supply cable and in
compliance with the technical regulations of the country where it is installed.
FAV E RO E L EC T RO NIC S
- 160826 - 00304-M02-03 - ML-FC serie scoreboards - User Manual Rev03
E NG LISH
9
/ 94