MT Logic BUTLER E465 TWIN Manuel D'utilisateur page 23

3 The amount of new messages will be show, press the down key to see all
messages (new and old messages).
4 Press the OK key to play a message.
5 After the play back, the internal voice will ask to delete all messages by
pressing the delete key.
9.3 Remote operation
The answering machine can be operated remotely using a touch-tone phone (DTMF tone selection
system). The remote control is menu operated.
To enter the remote operation
1 Call your machine.
The answering machine picks up the line, you hear the outgoing message and a
beep.
2 After the beep, press the ' ' key long. The unit will ask to enter the VIP code.
3 Slowly dial the VIP code (default = '123').
•
If the VIP code is incorrect the unit will confirm and ask you to re-enter.
4 If the VIP code is correct and the unit has new messages, it will start to
pronounce the amount of new messages and also play them. When all
messages are played, the unit will ask you to press '5' to delete current
played messages, or '1' to hear main menu.
•
1 If the unit doesn't have any new messages it will say so and ask you to
press '1' for main menu.
Main menu
1 Press '1' to hear the main menu.
2 Press '2' to play all messages.
3 Press '3' to play new messages.
4 Press '4' to skip back during messages.
5 Press '5' to delete during messages.
6 Press '6' to skip forward during messages.
7 Press '7' to set answer on/off.
8 Press '8' to hear outgoing messages menu.
9 Press '9' to set a new security code.
You are not obliged to play the main menu before activating any function.
Answering machine
23