Télécharger Imprimer la page

MT Logic BUTLER E465 TWIN Manuel D'utilisateur page 22

Publicité

Les langues disponibles

Les langues disponibles

Answering machine
Due to noise on your telephone line, it's possible that the device will not disconnect
automatically, but record up to max. 3 minutes. The recording will be interrupted as
soon as you take the line. If the unit continuous recording, press
Call screening on base and handset
This function is convenient if you only want to answer certain calls. During incoming call it is
possible to screen the call over the base and handset and hear who is calling. On the base, if the
speaker volume is not set to minimum, you can hear the outgoing message and the caller who is
leaving a message. For the handset:
Recording a memo
A memo is considered as an incoming message that can be picked up later by the user. The max.
recording time for a memo is 3 minutes.
#
Playback of incoming messages and memos
On the base:
During playback, you can:
On the handset:.
22
1 When "SCREEN?" appears press OK, you can hear the caller by the
handset.
2 Press the delete key to stop the screening.
1 Enter the menu.
2 Select "TAM SETTINGS" and confirm.
3 Select "MEMO REC" and confirm.
4 The internal voice will ask you to start the memo recording after the beep.
5 Press the ' '-key to stop the recording.
#
6 Press the playback key to play all the messages and memos.
7 Press the playback for 2 seconds to play only the new messages and memos.
For each message, the internal voice announce the day and time when the
message was recorded.
• Press the skip back key once to go to the beginning of the current message.
• Press the skip back key twice to go to the previous message.
• Press the stop key to stop the playback.
• Press the delete key to erase the current message.
• Press the play/pause key to interrupt the playback. Press the play/pause key
again to restart playback.
• Press the skip forward key to go to the next message.
After you have listened to all messages, the internal voice will ask you to
delete all the messages.
• Press the delete key to confirm. After pressing delete, the internal voice con-
firms that all the messages have been deleted.
• Press the stop key to skip.
1 Enter the menu.
2 Select "PLAY MESSAGES" and confirm.
on the base.

Publicité

loading