MT Logic BUTLER E465 TWIN Manuel D'utilisateur page 14

Personalize the handset
6.3 Activation/deactivation of beeps
The handsets can emit a beep tone when a key is pressed, when the batteries are low or when the
handset is out of range.
Key pressed beep tone on/off
Low battery
Handset out of range
6.4 Handset name
You can change the name displayed on the handset during standby (max. 9 characters). This
function allows you to personalize each handset.
14
1 Enter the menu.
2 Select "SETUP" and confirm.
3 Select "HANDSET" and confirm.
4 Select "INT MELODY" to change the internal melody or
"EXT MELODY" to change the internal melody and confirm.
5 Select a melody (1 to 10).
6 Press the OK key to confirm or return to the previous menu.
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "BEEP" and confirm.
4 Select "KEYTONE" and confirm.
5 Select "ON" to activate or "OFF" to deactivate and confirm.
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "BEEP" and confirm.
4 Select "LOW BATTERY" and confirm.
5 Select "ON" to activate or "OFF" to deactivate and confirm.
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "BEEP" and confirm.
4 Select "OUT RANGE" and confirm.
5 Select "ON" to activate or "OFF" to deactivate and confirm.
1 Enter the menu.
2 Select "HANDSET" and confirm.
3 Select "NAME" and confirm.
4 Enter the name you want and confirm.
Press the delete key to delete a character. Press and hold the phonebook key to
exit the menu without taking any modifications into account.