Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. 2SIDE: for connecting any external device that controls double gates
2. COM: for connecting the "ground" of external devices
3. 1SIDE: for connecting any external device that controls a single gate
4. SWHIPE CARD: for connecting any external device that controls the
gate opening
5. COM: for connecting the "ground" of external devices
6. IR terminal: for connecting the photoelectric sensor
7. 12V DC output: for connection of the photoelectric sensor (DC current
output ≤200mA)
8. 24V battery output: for connecting a backup battery (+)
9. 24V battery output: for connecting a backup battery (-)
10. 24V DC output: for connecting an external device, such as photoelectric
sensor, maximum consumption 1A
11. GND: or connecting the "ground" of external devices
12. 24V DC output: for connecting the warning lamp (+)
13. 24V DC output: for connecting the warning lamp (-)
14. 24V DC output: NF terminal for electric lock connection
15. COM: for connecting the "ground" of the electric lock
16. 24V DC output: NA terminal, for connecting a magnetic lock
17. Alarm output 24V DC
18. Alarm output 24V DC
19. and 20. The Motor1 terminal is used to connect the motor 1 installed on
the gate that first closes and then opens. Connect here the first red wire
User manual
25
26
27
29
1
2
3
4
5
6
7
8
28
9 10 11 12 13 14 15 16
17 18
24
23
19
20
21
22
12
Publicité
Table des Matières
