Optional Rotisserie Kit - Jackson Grills Versa 100 Manuel D'utilisation

OPTIONAL ROTISSERIE KIT

An OPTIONAL complete Rotisserie Kit is available for the Versa 100 Portable Grill. The kit comes complete with
stainless steel brackets, heavy duty rotisserie rod, rotisserie forks, bushing, rotisserie motor, and all the necessary
stainless steel hardware.
*Please inquire with your local dealer for availability and pricing
Optional Rotisserie Kit Installation:
◼
1. Carefully remove the rotisserie kit parts from the packaging.
2. Install the motor mounting & Spit Bracket on each side of the oven (base), using the supplied screws.
3. Install the motor on the motor bracket.
4. Place the forks on the rotisserie rod in the desired location.
5. Place the rotisserie rod into the motor. Slide the rotisserie rod bushing over the opposite end of the rod and drop
into the cut out provided in the inner hood side. Tighten the thumb-screw provided with the rotisserie rod bushing.
6. When in use, spin the rod with your desired food until the weight of the food is at the bottom
Storage: Keep your rotisserie kit in a warm and dry area when not in use. Clean all components well after every use.
Leaving food products and other environmental particulate matter on the surfaces of these components can cause
them to have surface rust. Talk to your dealer about polishing out surface rust if this occurs.
*Note: Side Shelf and Rotisserie are Optional
11