Initial Use - Sanitas SIH 21 Mode D'emploi

Overview of atomiser and accessories
8 Compressed air hose
9 Atomiser
10 Nozzle attachment
11 Medicine container
12 Mouthpiece
13 Adult mask
14 Child mask
15 Replacement filter

5. Initial use

Setup
Remove the unit from the packaging. Place it on a
flat surface.
Ensure that the ventilation slits are free.
Fold open the lid [2] to access the accessories.
Before using the unit for the first time
Note
• The atomiser and accessories must be cleaned and
disinfected before they are used for the first time. For
information about this, see "Cleaning and disinfec-
tion" on page 20.
• Attach the compressed-air hose [8] at the bottom of
the medicine container [11].
• Connect the other end of the hose [8] to the hose
connector [6] on the nebuliser by lightly turning it.
Mains connection
Connect the unit only to the mains voltage listed on
the type plate.
• Insert the mains cable plug [1] into a suitable socket.
• Push the plug completely into the mains socket.
Note
• Ensure that there is a socket near to where the unit
will stand.
• Lay the mains cable in such a way that no one can
trip over it.
• To disconnect the nebuliser from the mains after use,
first switch off the device and then remove the plug
from the socket.
18