Applicator Selection; Units - Sportec Sonopuls 190 Mode D'emploi

8.5.5

Applicator selection


Push the icon [5] to select
the applicator.
8.5.6

Units


Push the icon [6] to select
"units"
5
Select the applicator A or B
by pushing the icon.
Push OK to confirm and to
return to the previous menu.

A is the left connection

B is the right connection
6
Select the desired read-out
of the ultrasound intensity.

There are 2 read-outs,
Watt/cm² and Watt.

You will return to the
previous menu.
Note: When no applicator is
connected on the selected output
a beeb will occur.
49