Technical Data; Warranty; Ec Declaration Of Conformity - Powerworks P48HT Mode D'emploi

EN
Problem
The motor is on,
blades do not
move.
There is too
much noise
and/or vibration
during operation.
8

TECHNICAL DATA

Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Measuered sound power level
Guaranteed sound power level
Vibration
Uncertainty
9

WARRANTY

(The full warranty terms and conditions can be found on
Powerworks webpage)
The Powerworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
Possible cause Solution
Do not use the
The machine machine and
has damage. speak to service
center.
Remove battery
The blades are pack then clear
blocked. blockage from
the blades.
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are
3. Inspect for
loosen.
damage.
4. Check and
tighten loose
parts.
Do not use the
The parts have machine and
damage. speak to service
center.
48V
3000(±10%) /
min
3000(±10%) /
min
610 mm
27 mm
2.8 kg
76.6 dB(A),
k=3.0
98.6 dB(A),
k=3.0
100 dB(A)
<2.5 m/s
1.5 m/s
English
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: Changzhou Globe Co., Ltd.
Address: No. 65 (3-4) Xinggang Rd., Zhonglou Zone,
Changzhou 213101 China.
Name and address of the person authorised to compile
the technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construc-
tion:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU (EMC-Directive)
• 2000/14/EC (Noise Directive) incl.
modifications(2005/88/EC)
Furthermore, we declare that the following (parts/
clauses of) European harmonised standards have been
2
used:
2
• EN 60745-1; EN 60745-2-15; EN ISO 3744; ISO
11094; EN 55014-1; EN 55014-2
Measured sound
power level:
Guaranteed sound
power level:
Conformity assessment method to Annex V / Directive
2000/14/EC.
6
Hedge Trimmer
HTE321
See product rating label
See product rating label
98.6 dB(A)
100 dB(A)