Connecting To A Bodypack Transmitter - MicroMic C 519 M Mode D'emploi

2 Interfacing
2.3.2 Connecting
to a Bodypack
Transmitter
Note:
Attaching the
Bodypack
Transmitter to
the Microphone:
Fig. 2: Inserting the
transmitter into
the adapter.
Refer to fig. 2.
16
• Use the supplied connecting cable to connect
the output socket on the gooseneck to the in-
put socket on the bodypack transmitter.
• You can attach the bodypack transmitter to your
belt or to the instrument. The PT 40 and PT 400
bodypack transmitters will also mount directly on
the microphone (refer to section 2.3.1 below).
1
1. Pull the ends of the fixing clip (1) out of the
adapter.
2. Slide the transmitter (2) all the way into the
adapter.
3. Reinsert the ends of the fixing clip (1) into the
openings in the adapter. The ends of the fixing
clip engage the locating holes in the transmit-
ter case to hold the transmitter in place.
2 3
AKG C 519 M / C 519 ML