Baby auto TOWN fix 23 Mode D'emploi page 15

4. INSTALLING CHILD SEAT. GROUP 2 & 3.
Use Group 2 & 3 only from approx.
4 to 12 years of age (15-36 kg)
Make sure you have installed the ISOCLICK anchors before
installing the chair as indicated in Group 2 & 3.
1. Place the child seat on the seat of the vehicle, ensuring it is
pressed firmly against the back of the vehicle seat (4.1).
2. Place the child in the child restraint seat with height adjuster
E at the child's shoulders (4.2).
3. Fasten the belt, ensuring that the lap belt goes through the
guide under both armrests and that the diagonal shoulder
belt passes through
shoulder and under the armrest that is next to the vehicle
anchor point. Fasten the seat belt into the vehicle´s buckle
until it "clicks", making sure the child seat is properly
installed (4.3, 4.4, 4.5 y 4.6).
5. CLEANING AND MAINTENANCE
1. Wash the straps and plastic parts with neutral detergent and
warm water.
2. Ensure that no soap enters the buckle or metal parts.
3. Do not use chemicals or bleach on any part of the chair.
4. Dry thoroughly before use.
If you have any question about using or installing this product, or if you
need a spare part contact our Customer Service.
E height adjuster on the childrens
WASHING INSTRUCTIONS
· The cover is removable and washable at
30º. Dry in the fresh air only.
· Wash in washing machine (cold).
· Do not use bleach.
· Dry clean, with any solvent except
trichloroethylene.
· Do not use dryer.
· Do not iron.
EN
15