Baby auto TOWN fix 23 Mode D'emploi page 14

2. SEAT PARTS AND FITTINGS
A. Headrest.
B. Belt hook.
C. Cover.
D. Armrest.
E. Best height adjuster (15-36 Kg.)
F. ISOCLICK Anchors.
G. ISOCLICK button to uninstall the system (Red)
3. ISOCLICK ANCHORS INSTALLATION. GROUPS 2 AND 3.
To install the chair it is first necessary to
install the ISOCLICK anchor.
To install the chair first install the ISOCLICK anchors and then
each group according to its individual installation.
1. Remove the anchorage rod protectors from the vehicle seat if
present (3.1).
2. Extract the ISOCKLICK Anchors
them 180 degrees from the base of the chair (3.2).
3. Install anchors through the slots in the upholstery between
the back and seat of the vehicle until you hear a "Click" this
means the anchor closure has been locked to the vehicle seat if
installation was correct (3.3, 3.4 y 3.5).
4. To uninstall ISOCLICK anchors press the red button
the ISOCLICK anchors to extract the chair from the vehicle
seat.
14
F from the chair by rotating
G and pull