Trevi SB 8370 SW Mode D'emploi Et Branchement page 12

ENGLISH
PLACEMENTS
The Soundbar can be place both on the mobile and on the wall:
POWER SUPPLY
- Connect the plug of power adaptor supply to the 19V
connect the power supply to a power outlet.
- Insert the plug of the Subwoofer power cord into an electrical outlet.
POWER ON/OFF AND AUTO POWER OFF FUNCTION
Power ON
1. Press the ON/OFF switch (7) on the Sound bar and turn it to the "I" position to switch the appliance on.
2. Press the ON/OFF switch located behind the Subwoofer and set it to the "I" position to turn the unit on.
3. The wireless connection between the soundbar and the subwoofer will take place automatically, if this does not
happen, switch off and switch on both devices.
Note:
• It takes a few seconds (or longer) for the connection between the Soundbar and Subwoofer.
• The closer the Soundbar and the subwoofer are, the better the sound quality will be. We recommend
placing the Soundbar and Subwoofer as close as possible and avoiding: --stacles between the
Soundbar and the Subwoofer. -- Devices that use the same frequency as the wireless connection,
such as a microwave oven, wireless LAN router, medical equipment.
3,42A socket (8) on the back of the sound bar and
12
SB 8370 SW