Krüger & Matz MOVE 6+ Mode D'emploi page 12

GETTinG STArTEd
STEP 1: Open the back cover and take out
battery.
STEP 2: Insert the cards (SIM and memory)
as indicated (with
downwards).
STEP 3: Install the battery. Make sure to align the
battery connectors on the battery with the pins in the
battery compartment.
STEP 4: Close the back cover.
microSIM
bATTEry/SiM CArd/MEMory CArd
inSTALLATion
• power off the mobile phone and disconnect it
from charger before unmounting battery or SIM
cards.
• Before removing memory card, make sure it has been
disconnected first!
• exercise caution when operating SIM card/memory card, as
friction or bending may damage the card.
• Keep the mobile phone and its fittings such as the SIM cards/memory
cards beyond children's reach.
• If the memory card cannot be read, please check whether it is has been inserted correctly.
• producer does not guarantee compability with every memory card.
• please note: dual SIM in standby will shorten the standby time compared to single SIM.
• Make sure the battery is fully charged if it has been out of use for a long period.
12
the chip/pins facing
microSD
microSIM
Owner's manual