JUKI DDL-5550N Manuel D'utilisation page 8

Les langues disponibles

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

We hereby declare that the sewing machine (sewing head) described below ;

1. Must not be put into service until the machinery to which it is incorporated has been declared

inconformity with the provisions of the Directive 2006/42/EC, and

2. Conforms to the essential requirements of the Directive 2006/42/EC, described in the technical

documentation, and

3. To be prepared with the above technical documentation compiled in accordance with part B of

Annex VII, and

4. Relevant information on which should be transmitted in response to a reasoned request by the

national authorities, by the electronic method or other according to the request.

Model

Serial No

Description

Function

Applied harmonized standards, in particular :

EN ISO12100-1, EN ISO12100-2, EN ISO10821

Manufacturer :

JUKI CORPORATION

2-11-1, Tsurumaki, Tama-shi, Tokyo, Japan

DDL-5550N

Industrial Sewing Machine

make stitches and sew

Table des Matières