Matrix HT 710-500 Traduction De La Notice Originale page 14

30. Children are not allowed to use the hedge
trimmer.
31. Noise at the workplace may exceed 85 dB(A).
In this case, the operator must wear ear-muffs
or similar. The noise level of this electric tool is
measured in accordance with EN ISO 3744;
and EN ISO 11094).
32. Vibrations on the handle were measured in
accordance with EN ISO 8041.
33. Please use an RCD with this unit.
2. Layout (see Fig. 1)
1. Cutter rail
2. Hand guard
3. Steady grip with button switch
4. Handle with button switch
5. Stress-relief clip
6. Power cable
7. Cutter guard
Important! You must never use the hedge
trimmer without wearing gloves.
3. Explanation of the plate
Warning
Keep out of the rain and protect from
getting wet.
Read the operating instructions
before using for the first time.
Pull the plug from the power supply
immediately if the cable gets
damaged or severed.
Wear safety goggles
14
Wear hearing protection
Sound power level guaranteed
103
dB
4. Technical data
Mains connection:
Power input:
Cutting length:
Cutter rail length:
Tooth spacing:
Cuts/min:
L sound power level:
WA
L sound pressure level:
PA
Vibration a :
w
Weight:
5. Mains connection
The machine may only be operated with single-
phase alternating current from a 230-240 V AC
50Hz supply. Before you use the machine, make
sure that the mains voltage complies with the
specifications on the rating plate.
6. Start-up and operation
Important! This hedge trimmer is suitable for
cutting hedges, bushes and shrubs. Any use
which is not expressly permitted in manual may
result in damage to the hedge trimmer and place
the user in serious danger.
The hedge trimmer is equipped with a two-
handed safety switch.
The machine works only when the switch on the
steady grip (Figure 2 / Item 1) is pressed with one
hand and the switch on the handle (Figure 2 /
Item 2) is pressed with the other hand.
230-240 V~/ 50 Hz
710 W
525 mm
550 mm
24 mm
1500
101,18 dB(A), K=3 dB
85 dB(A), K=3 dB
2 2
6,703 m/s , K=1,5 m/s
3,35 kg