Publicité
Les langues disponibles
Les langues disponibles
5.
Power Adapter (IEC): Insert the included power cable here to charge the unit. Note that
the Transactive Mobile can run off the power adapter while it simultaneously charges the
battery. The charge indicator illuminates when the battery is charging.
6.
Voltage Selector: Set this to the correct voltage for your location standard.
7.
Power ON/OFF Switch
8.
iPod Charging Switch
9.
Battery Level Indicator: While the unit is powered ON, these four lights indicate the
power left in the battery. Battery life varies based on volume and usage.
10. Link Output: This ¼" jack is a stereo line level output that can be connected to the stereo
input of an amplifier or amplified loudspeaker such as another Transactive Mobile.
TROUBLESHOOTING GUIDE
Use this troubleshooting guide if: The sound is distorted at high volumes.
•
Input is clipping: Try lowering the input gain or the volume control on your sound source
or music instrument.
•
Output is clipping: Lower the main volume level.
•
There is too much bass: Try adjusting the tone or EQ control on your sound source to
lower the bass level. This will allow you to play the music louder before clipping (distortion)
occurs.
•
The link cable: is being plugged into the instrument or MIC input instead of the RCA line
input.
SPECIFICATIONS
•
Input Voltage: AC 100-120V/ 60Hz 220-240V/ 50Hz
•
Power Consumption: 20W (110/220V), 36W (220/240V)
•
Output Wattage: (Peak) 22W
•
Output Wattage: (RMS) 15W, 1%THD
•
Frequency Response: 70Hz~ 50kHz +/- 3dB
•
Bottom pole mount specifications: Standard Pole Mount found at professional audio
retailer
o
o
•
Time required to fully charge the Transactive Mobile: under 4 hours
•
Battery life: Over 6 hours* at full volume of the Transactive Mobile when fully charged.
•
iPod compatibility: made for iPod (4G and later), iPod Nano and iPod Mini.
*Note: Battery life may vary based on temperature, age, and volume usage of product.
depth 80mm (3.15")
Diameter 35.5mm (1.40")
3
Publicité
