Domo DO634K Mode D'emploi page 25

PROBLEMS AND SOLUTIONS
Problem
The appliance does not work.
The appliance has been stopped working.
"F" flashes on the display.
The appliance does not heat enough.
www.domo-elektro.be
Solution
- Make sure the connection plug has been
connected correctly.
- Check if the appliance works if you use
another socket
- After 1.5 h, the appliance shuts off
automatically. Let the appliance cool down
for 10 min. and press again the on/off
button.
- The appliance has been overheated. Let
the appliance cool down and try again.
- Did you plug in the appliance first and then
the connection plug into the heating belt?
You always need to connect the connection
plug first into the heating belt and then you
need to plug in the appliance.
- Has the connection plug come loose during
use? Unplug the appliance first, connect the
connection plug again to the heating belt.
Then you again plug in the appliance.
- After +/- 15 min. the appliance reaches the
set temperature. Increase the temperature
if necessary.
25
DO634K