• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the Wine Cooler will not start.
•
When you use the Wine Cooler for the first time or restart the Wine Cooler after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Wine Cooler is running for a few hours everything will be back to
normal.
•
How to remove the Shelves
•
To prevent damaging the door seal, ensure that the door is fully opened before pulling the shelves
out.
•
For easy access to the wine bottles, the shelves can be pulled partway out.
•
Before removing a shelf please remove all items first. Pull the shelf forward until the notches in
the sides of the shelf align with the pegs in the sides of the cabinet. Lift the shelf up over the pegs
and remove it.
Handle installation instruction
3. Using a "+" type head screwdriver remove the four screws
IN ILLUSTRATION 1)
○
4.
Align the handle
until the handle sets flush against the door frame. (AS INDICATED IN ILLUSTRATION 2)
,b with the four screws and tighten them using a "+" type head screwdriver
○
,a at the left side . (AS INDICATED
15