Display Indications - Rollei Soluna II-60 Mode D'emploi

Display indications

22
13
Radio signal
14
channel (0 – 15)
15
Group (A – J)
16
Adjustable output
17
Colour temperature
18
Battery status display
19
AC display
Operation
1. General instructions for initial operation
• Please check the box content for completeness:
1x Rollei Soluna II-60 LED continuous light, 1x standard reflector 55 degrees, 1x
power cord, 1x protective cap, 1x operating instructions
• Please read the operating instructions completely before the first use and
observe all warnings and safety instructions .
• Mount the LED continuous light on a lamp tripod . Lock it with the lamp tripod
locking device [8] . The inclination of the LED continuous light can be adjusted
with the tilt lock [10] .
• Attach the desired light shaper / flash umbrella . The LED continuous light is
equipped with an umbrella holder [6] for reflex / transmitted light umbrellas and
the Bowens S-type adapter [B] for the use of various light shapers (softboxes,
reflectors, beauty dishes etc .) .
A) Release key
B) Bowens S-type adapter
C) Bowens pins
13
16
17
ENGLISH
14
B
C
A
15
18
19