Télécharger Imprimer la page

EHEIM powerCleaner 3533 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
A Remove the battery compartment
the upper and lower sides of the glass scraper
B Place 1.5 V/ AA /LR6 batteries
Note: When closing the battery compartment make sure that the O-ring
is clean and undamaged.
C Place the blade
D Then press the blade in an upwards direction until it clicks into place.
Caution: To avoid injury when assembling/disassembling the blade, do
not remove the blade guard
E To facilitate cleaning of deeper aquariums, attach the extension handle
to the glass scraper.
Simply insert the glass scraper into the retainer on the handle.
F Then push the safety catch
G
To release the glass scraper from the extension handle again, push the
1
safety catch down and press the handle release
G
This allows the retainer on the extension handle to be easily released from
2
the glass scraper which can then be removed again.
H Remove blade guard by pressing on the sides.
Operation I - J
I
Press the ON switch
which additionally shines light onto the cleaning area.
J Press the OFF switch
Cleaning K
Caution: This appliance is solely to be used for cleaning aquarium
glass.
K Avoid the glass scraper coming into contact with the silicone seals at the
corner.
Caution: Please ensure that the glass scraper does not damage the
silicone seals at the corners of the aquarium as this may cause your
aquarium to leak.
Note: Do not use the glass scraper in gravel /substrate.
To protect the blade and avoid injury, replace the blade guard on the glass
scraper after cleaning.
Exchanging the blade L - M
Caution: To avoid injury when assembling/disassembling the blade, do
not remove the blade guard
Replace the blade when cleaning performance begins to deteriorate.
L To release the blade from the attachment, press it downwards at a 90°
angle.
M The blade can then be removed upwards.
into the compartment and close the cover.
into the blade attachment
.
until it reaches the top.
1 x to turn on the glass scraper and LED light
1 x to turn off the appliance and lighting.
.
by pressing the unlock button
.
at a 90° angle.
.
on

Publicité

loading