EN
TOUCH&STEAM OPERATING AND MAINTENANCE MANUAL
Press the temperature controls, buttons "C" and "A", firmly and in rapid succession, and they will glow
brighter, and then the "ON/OFF" button. In Fig. C the sequence is shown as numbers "1", "2" and "3".
The "ON/OFF" button (shown as number "3") must be pressed firmly for a few seconds until all the control
panel buttons have been flashing for a few seconds.
fig. C
The "ON/OFF" button (shown in Fig. C as number "3") will start to flash. Now hold down the "Hammam/
Turkish bath" button for at least 5 seconds (shown in Fig. D as number "4") until it starts flashing.
The button will flash for a few minutes.
During this phase the generator is recognising all the additional features installed.
fig. D
Now follow the procedure on the next page.
40
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
A
2
4
without having to give prior warning or replace this manual.
3
C
1