SOLAC PC1510 Mode D'emploi page 7

energy consumption, as well as longer use
from the water tank (lower water consumption).
DRY AND/OR STEAM IRONING:
The appliance has a steam control trigger
•
(11) which, if not pressed, allows dry ironing
(without steam)).
Temperature setting 2 or 3 should be selected
•
in order to iron with steam
Steam flow depends
•
temperature: the higher the temperature, the
greater the steam flow.
Ironing can be done horizontally or vertically.
•
To activate automatic continuous steam,
•
engage the lock (12) on the steam trigger (11)
for greater convenience while ironing.
VERTICAL IRONING:
It is possible to iron hanging curtains, items
•
of clothing on their own hanger, etc. To do so,
follow these instructions:
Iron from top to bottom, if you wish to use
•
steam press the steam control (11), follow the
instructions given in the steam ironing section .
Important: for cotton
•
recommended to put the base of the iron
in contact with the material. For other more
delicate fabrics, it is recommended to keep the
base of the iron a few centimetres away.
AUTO-OFF FUNCTION (AUTO-OFF):
In order to save energy, the appliance switches
•
to auto-off mode if it is not moved for 3 minutes
or more. When this happens, 6 beeps are
emitted and the auto-off indicator light flashes,
indicating that this function is activated.
To resume operation just touch any button on
•
the appliance.
LOW WATER WARNING:
When the appliance has run out of water, a red
•
light flashes and it beeps 3 times, press the
steam button again and the low water warning
will disappear
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
•
Remove the water from the water tank.
•
Clean the appliance
•
CLEANING
Unplug the appliance from the mains and let
•
it cool down before performing any cleaning
task.
Clean the appliance using a damp cloth with a
•
few drops of detergent and then dry it.
Do not use solvents, or products with an acid or
•
base pH such as bleach, or abrasive products,
to clean the appliance.
on the selected
Do not immerse the appliance in water or any
•
other liquid, or place it under a running tap.
*HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
For the appliance to work correctly it should
•
be kept free of lime scale or magnesium
incrustations caused by the use of hard water.
To prevent this kind of problem, we recommend
•
the use of water with low lime or magnesium
mineralisation.
Homemade solutions, such as the use of
•
vinegar, are not recommended for de-scaling
this appliance and will result in the loss of
product warranty.
FAULTS AND REPAIR
and linen, it is
In the event of a fault take the appliance to
•
an authorised Technical Support Service. Do
not try to dismantle or repair it, as this may be
dangerous.
If the mains cable has been damaged, it must
•
be replaced, proceed as in the case of a fault.
Do not use scented water, as this damages the
•
coating inside the steamer.
FOR EU PRODUCT VERSIONS
AND/OR IN THE CASE THAT IT IS
REQUESTED IN YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY
OF THE PRODUCT
The packaging materials for this appliance
•
are included in a collection, classification and
recycling system. Should you wish to dispose
of them, use the appropriate public containers
for each type of material.
The product does not contain concentrations of
•
substances that could be considered harmful
to the environment
EN