Operation; Daily Use - Leonard LKT1441 Notice D'utilisation

Masquer les pouces Voir aussi pour LKT1441:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
Ventilation requirements
The airflow behind the appliance must be
sufficient.

OPERATION

Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
Switching off
To turn off the appliance, turn the
temperature regulator to the "O" position.
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:

DAILY USE

WARNING! Refer to Safety
chapters.
min.
5 cm
200 cm
CAUTION! Refer to the
assembly instructions for the
installation.
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
Leonard 21
2
min.
2
200 cm

Publicité

Chapitres

Table des Matières
loading

Table des Matières