Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
2.2.4 Brakes
The go-kart is equipped with a special hub. With this hub it is possible while riding forwards to pedal
backwards so that the braking function in the rear wheel comes into action. While doing so, the brake
function is being operated. Besides that it is also possible to ride backwards.
2.3 Restrictions for use
•
Always brake using the back pedal brake.
•
Do not ride backwards at great speeds. Doing this could make you lose control.
•
Collisions or other stunts increase the chance of injury to both the user and the product and are
not allowed.
•
Avoid contact with moving parts while riding the product.
•
Do not get on or off the product while it is moving
•
Do not overload the product. Maximum user weight is 50 kg.
•
Never ride in the dark without lights
•
Only original BERG accessories may be used. BERG has a range of accessories with which you can
adapt the go-kart entirely to your own wishes. You can find all the accessories at www .bergtoys.
com.
3. Maintenance
Some maintenance is necessary in order to use the BERG product and have fun with it for a long time.
This chapter describes how, how often, and which maintenance must be carried out.
3.1 Maintenance scheme
Daily
Wheels / Tires
•
Check for wear
•
Check the tire pres-
sure and if neces-
sary increase the
pressure.
3.2 Maintenance activities
3.2.1 Frame
The frame is powder-coated or black zinc plated. To prevent rust forming it's important to not keep the
pedal go-kart outside for a long time during rain and clean the frame regularly. If you want to conserve
the frame with grease, only use acid free substances. You can treat damaged areas with paint.
Check the bolts and nuts for rust and replace them to prevent them from breaking which can cause
injuries.
8
Monthly
Frame
•
Clean and check all
nuts and bolts.
•
Check the frame
for any cracks and
fractures.
Driving Mechanism
•
Check chain for
correct tension.
•
Chain greasing.
Steering
•
Check all nuts and
bolts.
•
Lubricate the mov-
ing parts.
•
Clean and oil the
chains.
Half Yearly
Driving Mechanism
•
Check for correct
functioning of
bearings, chain, hub,
sprockets and axles.
Yearly
Plastic Parts
•
Clean the plastic
parts and check for
damage.
Publicité
Chapitres
Table des Matières
