Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Basic Administration
Basic Administration
Log File Information
Recently executed commands are recorded in the log
file on the video network station. The log file is used
to check whether a special event was executed, such as
whether a command was issued before or after an
alarm occurred. It is also used as a troubleshooting tool
to resolve operational problems.
Log File Display on the "Administration
Overview" Page
1
Display the video network station monitor screen
in the Web browser, and click the [Admin] button.
The "Administration overview" page (for setting
and administration) appears.
2
Click the [Network Station] icon.
The [General Settings] screen appears.
3
Click the [View Log File] button.
The "Log file Events" page opens showing all
commands executed since the system was last
restarted.
38
Checking the Log File
The log file is saved as a text file that can be opened
with a text editor. The following information is
typically found in the log file.
Fri Apr 30 09:56:35 Info :Initialize video decoders
Fri Apr 30 09:56:41 Detection of color standard.
Fri Apr 30 09:56:41 Saa7111Decoder ::Found PAL
BGHI/NTSC M.
Fri Apr 30 09:56:41 Detection of color standard.
Fri Apr 30 09:56:42 Saa7111Decoder ::Found PAL
BGHI/NTSC M.
Fri Apr 30 09:56:42 Initialize serial ports device
Drivers
Fri Apr 30 09:56:42 serialHAL ::mode :using RS232
Fri Apr 30 09:56:42 serialHAL ::mode :using RS232
Fri Apr 30 09:56:42 Create Nulldriver,port 2
Fri Apr 30 09:56:42 Initialize Juliette chip
Fri Apr 30 09:56:42 Start script
Fri Apr 30 09:56:42 Start SoftWatchdog
Fri Apr 30 09:56:42 Create camera device port
connection
Publicité
Chapitres
Table des Matières
