Publicité
Les langues disponibles
Les langues disponibles
Overview
1. Handle
2. Body
3. Power Charging Light
4. DC Jack
5. Crank
6. Power Switch
7. Rubber Cap
Specifications:
• Material:
ABS
• Dimensions:
231x78x87 mm
• Lighting:
5 LEDs
• Battery:
Built in 3.6 V/300 mAh Ni-MH
• Resistance:
IPx3
• Included:
DC adapter/100 mAh
Burn time with 1-2 min hand cranking:
Full brightness:
5 - 7 minutes
Half brightness: 7 - 9 minutes
Burn time with fully charged battery:
Full brightness:
2.5 - 3 hours
Half brightness: 5 - 6 hours
Power Operation
1. Press the "Power" button to activate the lantern on full brightness.
2. Press the "Power" button again to let the lantern operate on half brightness.
3. Press the button again to switch the lantern off.
Charging Via Crank Winding
1. Make sure the lantern is in off mode.
2. Lift up the crank as shown in the picture below.
3. Wind the crank for 1-2 minutes.
4. Place the crank back to its position and the lantern is ready to use.
ENGLISH
2
Publicité
