IMPPUMPS NMT SMART Série Installation Et Mode D'emploi page 22

Co s a
The pump operates with the currently set speed
(RPMset on the drawing).
at which the pump will operate. We can only scroll
through the other parameters.
N g mode
the selected operating curve in the mode and night curve. The transition to
the night mode depends on the media temperature in the system.
pump operates in the selected operating curve of the mode. When the pump
pump passes over to the operating curve in the selected operating mode.
The night mode operates only in combination with the above indicated
modes. It is not an independent operating mode.
5.6. e g
three keys for 5 seconds. The pump is set to the automatic mode of operation.
The previously set values for pressure and revolutions will be deleted.
5.7. T ead pumps NMT
Pumps have a common hydraulic housing that is equipped with a change-
speed
e pump o e a or se
MART C
-20-
Constant pressure
H
RPM
set
Min.
-
Constant revolutions
gs
SMART C
SMART
Max.
+
Q Q