Stand and wall-mounting instructions (optional)
Wall mounting instructions
Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket
(not supplied with LED TV, please contact your local hardware store) and the mounting
holes on the back of the unit. We recommend removing the TV stand prior to wall
mounting the TV. Please
Figure 1
Long mounting bracket
Figure 2
Short mounting
bracket
Wall-mounting instruction:
1. Please ensure the distance of wall-mounting holes is 200mm or 400mm on the back
cabinet before you mounting your TV on the wall.
2. Mark the horizontal distance screw holes A and B with pencil on the wall by using long
wall-mounting bracket as ruler (There are "0" engraved in the middle of long
wall-mounting and "400" engraved at the end of the long wall-mounting bracket, as
figure 1 shown)
3. Align the upper holes on the short wall-mounting bracket (5) to A and B, then mark the
vertical distance screw holes C and D with pencil on the wall, as figure 2 shown.
4. Drill the holes at A, B, C and D position on the wall.
5. Drive Nylon sleeves(6) into the screw holes on the wall.
6. Fasten short wall-mounting bracket (5) on the Nylon sleeves with self-tapping screws
(4) on the wall.
7. Fasten two hexagonal bolts(8) to wall-mount hole on back cabinet.
8. Fasten long wall-mounting bracket (2) with screws (4) into the two screw holes on the
rear cabinet (Place the long wall-mounting end with hook upper as figure 3 shown);
9. Left the TV and hang it on the wall by two people.
Note: 1. Please mount your TV on the strength of the wall for withstanding the TV's weight.
2. Be careful not to scratch panel and TV cabinet when your fasten the screws on the TV.
Note: The product and illustrations in this user's manual is only for explanation purposes
and may vary depending on model.
see previous page for instructions on removing the stand.
Wall
400
Figure 3
1. LED TV
2. Long wall-mounting bracket
3. Mounting screw
4. Self-tapping screw
5. Short wall-mounting bracket
6. Nylon sleeve
7. Wall
8. Hexagonal bolt
10