Linea 2000 Domo RC010 Mode D'emploi page 64

1. Turn off the water and ice dispenser via the control panel. Unplug the appliance.
2. Remove the ice cube container from the freezer by lifting it up first and then pulling it out
in a horizontal movement.
3. Remove the lid of the container and clean all parts carefully with a soft cloth, warm water
and a mild detergent.
4. Assemble the water and ice dispenser again, but please make sure all parts are
completely dry. Attention: the rod at the bottom of the water and ice dispenser needs to
be replaced correctly in the opening of the freezer.
5. Replace the water and ice dispenser into the freezer. Turn the appliance back on. Also,
switch the water and ice dispenser back on via the control panel.
64
Domo RC010