Publicité
Les langues disponibles
Les langues disponibles
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
· For uneven surfaces, front feet can be aligned.
· After installation, leave the freezer for 12 hours before turning it on. This way the
refrigerant can settle.
CONNECT THE WATER AND ICE DISPENSER TO THE WATER SUPPLY
At the back of the appliance there is a supply to connect the appliance to the water line.
Please follow carefully the instructions:
1.
Turn off the water supply.
2.
Connect the white tube to the supply (A) at the back of the appliance.
3.
Connect the other side of the tube to the water filter (B).
4.
Connect the blue tube to the other side of the water filter (C). You can attach the water
filter to the wall along the water line using the supplied holders to install everything
properly.
5.
Connect the other side of the blue tube to the water line (D). It is very important this
connection fits the water line correctly. If necessary, you have to use a connecting-piece
(not supplied) to make the connection fit perfectly on the water line.
6.
Turn the water supply back on and open the tap. The appliance is now ready to dispense
water and ice.
Tip : if the hose is too long, you can also shorten it or roll it up. If you choose to roll it up, make
sure the hose is not folded.
D
54
Domo RC010
C
B
A
Publicité
