Publicité
Les langues disponibles
Les langues disponibles
Directions for use
After installing the equipment, and connecting to a
power source, it is ready for use. Hold hands within
11 cm from the exhaust, the fan will start automat-
ically. When hands are withdrawn, the fan will stop
in about a second.
Maintenance and repair
1) Do not use abrasive or chemically aggressive
cleaning agents. These may damage the surfaces
of the machine. Use only a mild detergent solu-
tion for cleaning.
2) In case of a malfunction, immediately disconnect
Technical data
Voltage: 230 VAC ~ 50Hz
Power: 1800W
Warranty
Any defect affecting the functionality of the appli-
ance that becomes apparent within one year after
purchase will be corrected by free repair or replace-
ment provided the appliance has been used and
EN
maintained in accordance with the instructions and
has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is
claimed under warranty, state where and when it
Discarding & Environment
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
6
In order to accommodate a variety of installation
circumstances, the proximity sensor is tuned to its
most sensitive setting by default. If the dryer oper-
ates with excessive frequency or duration, the sen-
sor sensitivity may be adjusted as shown in Illustra-
tion 6.
the power from the device and have it checked by
a certified electrician.
3) Do not insert any objects into the intake or ex-
haust vents.
Circuit for infrared proximity sensor. Illustration 7
was bought and include proof of purchase (f.e. re-
ceipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
Publicité
