eNet
Tecla sensora con receptor vía radio
Priority, wind alarm
Priority, sun protection
Priority, twilight
Switch off brightness over
shoot
Switch on brightness under
shoot
Minimum brightness
Maximum brightness
32582703
J:0082582703
0...4
Basic setting: 3
0...4
Basic setting: 0
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
1...67 %
Basic setting: 5 %
75...100 %
Basic setting: 100 %
8/10
Specifies the priority for recal
ling and removing a scene of
type Wind alarm for the chan
nel.
Specifies the priority for recal
ling and removing a scene of
type Sun protection for the
channel.
Specifies the priority for recal
ling and removing a scene of
type Twilight for the channel.
Allows automatic switchoff
according to the brightness. If
the parameter is On, then the
light controller switches off au
tomatically when the bright
ness setpoint is greatly excee
ded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen
ted.
Allows automatic switchon
according to the brightness. If
the parameter is On, then the
light controller switches on au
tomatically when the bright
ness setpoint is greatly under
shot. We recommend only
using the parameter in
connection with the parameter
"Switchoff on brightness over
shoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen
ted.
Specifies the minimum set
table brightness.
Note: If parameters or scene
values are set to a level lower
than the minimum brightness,
then the system will dim to mi
nimum brightness.
Specifies the maximum set
table brightness.
Note: If parameters or scene
values are set to a level higher
than the maximum brightness,
then the system will dim to
maximum brightness.
14.03.2014