Télécharger Imprimer la page

physa VP - 801 Manuel D'utilisation page 5

Appareil à vapeur pour soins de la peau

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
8
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
2.4. SAFE DEVICE USE
a)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
Do not move, adjust or rotate the device in the
course of work.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
j)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k)
Keep the device away from sources of fire and heat.
l)
Only fill the device with distilled water.
m)
Do not pour essential oils, medicinal herbs, or other
substances into the water tank.
n)
Do not lift the lid while the water in the tank is
boiling. Wait until the water has stopped boiling.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device generates steam. It is used in beauty salons.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
1
3
2
1.
Nozzle
2.
Water tank
3.
Control panel
CONTROL PANEL
4
5
4.
„OZONE" button- ON/OFF
5.
„VAPOR" button -ON/OFF
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 83%.
Keep the product away from hot surfaces. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions. Position the device such that you always have
access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details on the product label.
3.2.2. ASSEMBLING THE DEVICE
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 25).
3.2.3. DISMOUNTLING THE NOZZLE
1
2
3
4
3.3. DEVICE USE
1.
Fill the container with water between the min. and
max marks. Use DISTILLED WATER.
2.
Connect the device to the power supply.
3.
Turn the "VAPOR" button to the ON position. The
heater starts to work after approx. 6 minutes. Steam
will start to come out of the nozzle. Do not point the
nozzle directly at the face when turning the device
on.
4.
After switching the "OZONE" button to the ON
position, active ozone will be released from the
steam. The appropriate ozone using time should be
adapted to the skin type.
5.
When the water level reaches the lower limit (MIN),
turn off the device and disconnect it from the power
supply. Then refill the water tank and reconnect
the device. If the water level drops to a minimum
and the water is not refilled, the device will turn off
automatically.
6.
After finishing work, turn off the device and
disconnect it from the power supply.
7.
Demineralized water only! Tap water, scented oils,
medicinal herbs and any viscous substances are
forbidden.
8.
Pay attention to the water level during operation
and turn off the unit if the water boils beyond the
maximum water level
9.
After use, pour out the remaining water to avoid
scale deposits in the cup.
NOTE: If there is a water leakage or abnormal steam
discharge during operation, turn off the appliance and
disconnect it from the mains. Remove the water tank and
check that the gasket is properly seated.
Directions for use
Skin type
Distance [cm]
Time [min]
Oily skin
30-35
15
Normal/combination
30-35
10
skin
Dry skin
30-35
5
Sensitive skin
35
5
Skin with discoloration
30-35
10
USING FRAGRANCE OILS
The device can also be used with fragrance oils. Open the
flap on the tip of the steam arm and remove the silicone
element with felt liner. Pour a few drops of fragrance oil
on the felt liner:
After use, remove the felt liner and rinse it under running
water. Never pour fragrance oils directly into the water
container!
3.4. CLEANING AND MAINTENANCE
a)
Always unplug the device before cleaning it.
b)
Use cleaners without corrosive substances to clean
each surface.
c)
Never spray the device with water jets.
d)
Use a soft cloth for cleaning.
e)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f)
Clean the nozzle, heater and the water tank at least
once a week by putting acetic acid into the water
tank.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used
to construct the device can be recycled in accordance
with their markings. By choosing to recycle you are
making a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
9

Publicité

loading