Setup Menu - Samsung UE32C5100 Mode D'emploi

Masquer les pouces Voir aussi pour UE32C5100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode
¦
When you set to Dual f-g, the current
sound mode is displayed on the screen.
Audio
Type
Mono
A2
Stereo ↔ Mono
Stereo
Stereo
Dual f ↔ Dual g
Dual
Mono
Mono ↔ Stereo
NICAM
Stereo
Stereo
Mono ↔ Dual f
 Dual g 
Dual
If the stereo signal is weak and an automatic switching,
occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to TV.
DUAL
Dual f-g
Default
Mono
Automatic
change
Dual f
Mono
Automatic
change
Dual f

Setup Menu

Setting the Time
¦
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
Available only when Clock Mode is set to
Manual.
Time Zone (depending on the country): Select your time
zone.
When Country is set to Others, you can use this
function.
This function is only available when the
Clock Mode is set to Auto.
Using the Sleep Timer
¦
t
■ Sleep Timer
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
¦
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock irst.
Timer 1
On Time
00
Inactivate
Off Time
00
Inactivate
Volume
Source
10
TV
Repeat
Sun
Mon
Once
L Move U Adjust E Enter R Return
00
00
Antenna
Channel
ATV
1
Wed
Tue
Thu
Fri
Sat
19
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ue37c5100Ue40c5100Ue46c5100Ue40c510

Table des Matières