How To Save Memories; How To Load A Memory; How To Turn On The Backlight - Sammic PCS Manuel De L'utilisateur

HOW TO SAVE MEMORIES

Your scale has 100 memories to store the prices of 100 products that are sold more frequently. The
memories are numbered from 00 to 99.
To save a price in a memory location:
1) Type the price you wish to save.
2) Press key.
3) Type the memory address (00-99) in wich you wish to save the price, or you also can press any
of the direct access keys
NOTE: We suggest to use an adhesive label to mark the direct access keys.

HOW TO LOAD A MEMORY:

1) Press the key
the direct access keys
Example:
If you wish to save $26.60 in the memory address 6, follow these steps:
1) Type
2) Press .
3) Type
With this sequence the price is saved in the memory address 06. If you wish to load the memory of
this example just type
the price stored in memory, in this case will be $26.60.
To change the price stored in a memory just type the new price and store it in the memory address
you want to change according the procedure described above. These keys are very useful to avoid
the same price constantly typing. To use of these memories we suggest to have at hand the list
product that are saved in each memory address.
To delete all the memories that are stored, turn the scale on and during the countdown type
PRINT
and all the memories will be deleted to zero.

HOW TO TURN ON THE BACKLIGHT

This scale model has a backlight that helps you to see the display information better. It can be
turned on in two ways:
1) Automatically: when an AC adaptor is connected to the scale.
2) Manually: It can be performed by pressing the
And can be turned off in two ways:
M15
, ...,
and then the memory address (00-99) you wish to load or just press any of
, ..., .
.
.
or just press the direct access key
or just
.
.
, and in the "PRICE" indicator will be displayed
key.
ENGLISH 11