Mangar Airflo 24 Mode D'emploi page 3

CHARGE THE BATTERY FOR 12 HOURS BEFORE
USE. To calibrate the battery and battery indicator,
it is essential before the first use to charge for
12 hours and then disconnect from the charger
and leave for 90 minutes to allow the battery
management software to correctly calibrate.
For the first 3 hours, the bottom light will flash green.
After 3 hours the first light will become a steady
green and the second light will start flashing. After
6 hours the bottom 2 lights will remain green and
the third light will flash. After 9 hours the bottom 3
will remain green and the top will be flashing. Then
after 12 hours the charge is complete and the top
light will remain flashing and other 3 will be off.
NOTE: In the case of a power cut, switching the power socket off or disconnecting the
charging lead, the charging process will not be interrupted as the unit remembers the
previous charge state.
NOTE: Disconnect the battery charger before using the Airflo 24.
3
Press the 'POWER' button to
turn the Airflo 24 'ON'.
1
Connect the 4-Way hand
control outlet hoses to the
corresponding numbered
connectors on the ELK or
Camel.
Healthcare solutions designed for life
GREEN
OPERATING
Quick Start Guide
GREEN
GREEN
GREEN
First 3
Hours
2
Connect the 4-Way hand
control inlet hose to the
Airflo 24.
4
Press the hand control
buttons to raise the
ELK or Camel.
GREEN
GREEN
GREEN
GREEN
12
Hours
Fully
Charged
3