Mangar Airflo 24 Mode D'emploi page 2

Quick Start Guide
This Quick Start Guide is not intended to replace the full user instructions.
Please read the full user instructions before using the Airflo 24.
CAUTION: The Airflo 24 must be put on charge for 12 HOURS before first use.
To calibrate the battery and battery indicator, it is essential before the first
use to charge for 12 hours and then disconnect from the charger and leave for
90 minutes to allow the battery management software to correctly calibrate.
Failure to do this could lead to incorrect battery charging and battery ladder
Fit the appropriate mains adaptor to the
charger (see 'Battery Charging' page 8).
Connect the battery charger to a mains
power socket and the Airflo 24 charging
socket.
2
STANDARD PACKAGE CONTENTS
A
B
BEFORE USE
indication.
1 x Airflo 24 compressor (A) fitted with a
24v - 2200mAh Ni-MH battery pack.
1 x Battery charger (with mains adaptors) (B).
1 x User Instructions.
1 x Mains Power Adaptor (Optional).